Hitachi.comHitachi.us 
Hard disk drives
 
   

  Overview     General specifications 

Travelstar 4K40 hard disk drives specifications

Travelstar 4K40 model summary Capacity (GB) RPM Interface
HTS424040M9AT00
40 4200ATA-6
HTS424030M9AT00
30 4200 ATA-6
HTS424020M9AT00
20 4200 ATA-6
 
   
Configuration  
Interface ATA-6
Capacity (GB)1 40/30/20
Sector size (bytes) 512
Recording zones 24
Data heads (physical) 2/2/1
Data disks 1
Max. areal density (Gbits/sq.inch) 70
   
Performance  
Data buffer (MB) 2
Rotational speed (RPM) 4,200
Latency average (ms) 7.1
Media transfer rate (Mbits/sec, max) 370
Interface transfer rate (MB/sec, max) 100MB/sec Ultra DMA mode-5
PIO 16.6MB/sec PIO mode-4
Seek time (read, typical)  
Average (ms) 12
Track to track (ms) 2.5
Full track (ms) 23
   
Reliability  
Error rate (non-recoverable) < 1 per 1013 bits transferred
Load/Unload cycle 600,000
   
Power  
Requirement +5VDC(±5%)
Dissipation  
Startup current (peak, max.) 4.7 W
Seek (avg.) 2.3 W
Read (avg.) 2.0 W
Write (avg.) 2.1 W
Performance idle (avg.) 1.85 W
Active idle (avg.) 0.85 W
Low power idle (avg.) 0.65 W
Standby (avg.) 0.25 W
Sleep 0.1 W
Power consump. efficiency index (W/GB) 0.016/0.022/0.033
   
Physical size  
Height (mm) 9.5
Width (mm) 70
Depth (mm) 100
Weight - typical (g) 95
   
Environmental characteristics  
   
Operating  
Ambient temperature 5° to 55° C
Relative humidity (non-condensing) 8% - 90%
Maximum wet bulb (non-condensing) 29.4° C
Shock (half sine wave) 300G/2ms
Vibration (random (RMS)) 0.67 G (5 - 500 Hz)
Swept sine 1 G 0 - P (5 - 500 Hz)
   
Non-operating  
Ambient temp -40° to 65 ° C
Relative humidity (non-condensing) 5% - 95%
Maximum wet bulb (non-condensing) 40° C
Shock (half sine wave) 1000G/1ms
Vibration (random (RMS)) 3.01 G (5 - 500 Hz)
   
Acoustics (A-Weighted Sound Power (Bels))  
Idle (typ.) 2.1
Op (typ.) 2.4
Idle (max.) 2.4
Op (max.) 2.6

1 GB equals one billion bytes when referring to hard drive capacity; accessible capacity may be less





   Terms of Use | Privacy Policy | Contact Us