|
CinemaStar 7K500
Mechanical data
Models: (Parallel) HCS7255050VLAT80, HCS7255040VLAT80, HCS7255032VLAT80, HCS7255025VLAT80 and (Serial) HCS725050VLA380, HCS725040VLA380, HCS725032VLA380, HCS725025VLA380
| Dimensions |
|---|
| Height | 25.4 mm |
| Width | 101.6 mm |
| Length | 146.0 mm |
| Weight |
640 grams max |
Breather hole
Outline dimensions and mounting holes
Notes:
- The recommended mounting screw torque is 0.6 - 1.0 Nm (6 - 10 kgcm).
- Maximum allowable penetration of the left and right side mounting screws on the drive is 4.5 mm.
- Maximum allowable penetration of the bottom mounting screws on the drive is 4.0 mm.
Front
Rear (detailed)
Mounting Holes
Connectors
Parrallel ATA
Serial ATA
|
