Deskstar (DALA-3540)
Jumper settings |
Model: DALA-3540 |
Option block |
Jumpers may be fitted to select the
following options: |
|
Pin Numbers |
| MASTER active |
1-2 |
| SLAVE active |
3-4 |
| Cable select |
5-6 |
| Write cache |
9-10 (Disabled with jumper) |
| Auto re-allocation |
11-12 (Disabled with jumper) |
| 541/528 MB selection |
13-14 (541 MB with jumper) |
|
 |
Auto reallocation jumper |
| Auto reallocation jumper is checked
during the initial power on reset (POR) check. Write cache is
disabled when a jumper is fitted. (+) Auto reallocation jumper
position needs to be OPEN when a user system wants to use write
cache. |
Note: Auto reallocation only
operates, and is mandatory, during write cache operations. Disabling
either function by jumper disables both. |
Write cache jumper |
| Write cache jumper is checked during the
initial POR check. Write cache is
disabled when a jumper is fitted. |
Shipping default settings |
| MASTER is set to on (jumper on pins
1-2), 541MB capacity set. No other jumpers are fitted. |
Note: The jumper positions JP1, JP2, JP3 must not be selected
concurrently. |
|
|
