Deskstar 3
Jumper settings |
Models: DAQA-32160, 32700, 33240 |
Option block |
 |
| Jumper settings |
Jumpers may be fitted to select the following options: |
|
Pin # |
| Master active |
1-2 (shipping default) |
| Slave active |
3-4 |
| Cable select |
5-6 |
| Slave present* |
7-8 |
| Write cache |
9-10 (disabled with jumper) |
| Reserved |
11-12 |
| Reserved |
13-14 |
Note: *Jumper these pins if the
slave drive is not recognized by this master. |
 |
| Write cache jumpers |
Write cache jumpers is checked during
the initial POR check.
Write cache is disabled when a jumper
is fitted and in this case a "Set Features" command to
switch write cache "on" or "off" will be aborted
by the drive. |
Shipping default settings |
Master is set to on (jumper on pins
1-2) No other jumpers are fitted.
Note: The jumper positions
JP1,JP2,JP3, must not be selected concurrently. |
| |
|
|
|
