|
The drive will
operate in all axes (6 directions). The drive will operate within
the specified error rates when tilted +/-5 degrees from these
positions.
Performance and error rate will stay within specification limits
if the drive is operated in the other permissible orientations from
which it was formatted. Thus a drive formatted in a horizontal
orientation will be able to run vertically and vice versa.
The drive must be securely mounted in the system to prevent
motion or vibration during a seek operation or spindle rotation
using appropriate screws or equivalent mounting hardware.
Vibration and shock tests are to be conducted with the drive
mounted to the equipment using the bottom four screw holes. |
