Travelstar 18GT
Mechanical data |
Models: DARA-215000 and 218000 |
| |
| Dimensions |
| Height |
12.7 mm + 0.0, - 0.5 mm |
| Width |
69.85 mm ± 0.25 mm |
| Length |
100.2 mm ± 0.25 mm |
| Weight |
135 grams maximum |
Mounting orientation
|
The drive will operate in all axes (6 directions). The drive will operate within the specified error rates when
tilted +/-5 degrees from these positions.
Performance and error rate will stay within specification limits if the drive is operated in the
other permissible orientations from which it was formatted. Thus a drive formatted in a horizontal
orientation will be able to run vertically and vice versa.
The drive must be securely mounted in the system to prevent motion or vibration during a seek operation or
spindle rotation using appropriate screws or equivalent mounting hardware.
Vibration and shock tests are to be conducted with the drive mounted to the equipment using the bottom four
screw holes. |
 |
 |
| The recommended mounting screw torque is 3 +/- 0.5 kgf.cm. |
The recommended mounting screw depth is 3.0 +/- 0.3 mm for bottom and 3.5 +/- 0.5 mm for horizontal mounting. |
|
|
|
|
