Mounting orientation
|
The drive will operate
in all axes (6 directions). The drive will operate within the
specified error rates when tilted +/-5 degrees from these positions. |
Performance and error
rate will stay within specification limits if the drive is operated
in the other permissible orientations from which it was formatted.
Thus a drive formatted in a horizontal orientation will be able to
run vertically and vice versa. |
The drive must be
securely mounted in the system to prevent motion or vibration during
a seek operation or spindle rotation using appropriate screws or
equivalent mounting hardware. |
Vibration and shock
tests are to be conducted with the drive mounted to the equipment
using the bottom four screw holes. |
 |
 |
| The recommended
mounting screw torque is 3 +/- 0.5 kgf.cm. The recommended
mounting screw depth is 3.0 +/- 0.3 mm for bottom and 3.5 +/- 0.5 mm
for horizontal mounting. |
|
