Travelstar LP
Mechanical data |
Models: DBOA-2360, 2528, 2540, 2720 |
| |
| Dimensions |
| |
| Height (mm) |
12.5 |
| Width (mm) |
69.85 |
| Length (mm) |
100.2 |
| Weight (gram) |
140 max. |
| |
| Mounting orientation:
|
| |
| The drive will operate in all axes (6 directions). The drive will operate
within the specified error rates when tilted +/-5 degrees from these positions. |
Performance and error rate will stay within specification limits if the drive
is operated in the other permissible orientations from which it was formatted.
Thus a drive formatted in a horizontal orientation will be able to run
vertically and vice versa. |
The recommended mounting screw torque is 3 +/-0.5 kgf. cm. The recommended mounting screw depth is 3.0 +/-0.3 mm for bottom and 3.5
+/-0.5 mm for horizontal mounting. |
The drive must be securely mounted in the system to prevent motion or
vibration during a seek operation or spindle rotation using appropriate screws
or equivalent mounting hardware. |
|
|
| The maximum allowable penetration of the mounting screw is 3.5 mm. |
| |
|
|
|
