Note 1)

The drive type setting jumpers are numbered as shown below according to each model. These jumpers are set by the manufacturer at shipment and changing the setting positions are not allowed.

Note 2)

0 : Jumper plug installed.

1 : No jumper plug installed.

Note 3)

The table 2-1 shows SCSI ID Setting Jumpers without setting SCSI ID Polarity inverted by the jumper plug between J6 No.7 and No.8.

Note 4)

SCSI ID can be set by either JP114 or J6. Please avoid setting SCSI ID by both JP114 and J6. No jumper plug must be installed in either JP114(No.9-14) or JP6(No.1-6).

: Jumper installed

: User changeable (Green Jumper)

Jumper Plug Location