DK326C-10WD Jumper Plug Installation
DK326C-10WD (Wide Differential Type)
The following jumpers are accessible to the user
- Note 1)
- The DK326C jumpers other than listed above (Black Jumper) are
installed by the manufacturer and must not be removed or replaced
by the user.
Never remove any of the "BLACK" factory set jumpers.
These jumpers are unique to each drive.
All jumpers should be set with power off.
-jumper socket part numbers.("GREEN")
JUMPER SOCKET LAYOUT (Wide Differential Type)
|
Pin No. |
1-2 |
3-4 |
5-6 |
7-8 |
9-10 |
11 |
12 |
| Connector No. |
|
| JP2 |
Delay Motor Start |
*1 |
*1 |
*1 |
*1 |
- |
| JP3 |
*1 |
*1 |
*1 |
Motor Auto Start |
SCSI BUS PARITY |
- |
| J6 |
ID 0 |
ID 1 |
ID 2 |
ID 3 |
*1 |
LED Anode PARITY |
LED Cathode PARITY |
NOTE : Don't remove any "*1" jumpers (factory setting)
- (Note 1)
 :Jumper installed (at
the shipment)  :User changeable(GREEN)
- (Note 2)
- Don't remove any "BLACK" jumpers. (factory setting)
|
