DK328H-43/DK318H-91 Jumper socket installation
Delayed Spindle start setting jumper (JP2 1-2)
(Narrow single ended Type)
This jumper connector is active only when JP3 7-8 is removed.
| No. | JP2 | Meaning |
| 1 |
 |
|
remove the jumper socket for JP2 1,2
(Default) |
|
Spindle motor automatically starts when the power is on. |
| 2 |
 |
|
install the jumper socket for JP2 1,2 |
|
Spindle motor starts in sequence via ID number x 10 seconds from the time power is applied. |
Jumper Connector Layout
|
|
|
