hitachi.com   hitachi.us

Home   |  Products   |   Support   |  Partners   |  Company   |  Buy Online

DK329H-91/DK319H-18 Jumper socket installation Wide single ended Type Jumper Connector Layout (Wide single ended Type) Option Jumper Connector C3 Pin No 1-2 3-4 5-6 7-8 11-12 13-14 15-16 17-18 Function ID3(8) ID2(4) ID1(2) ID0(1) Enable Auto Start Termination Reserved LED Pin No 19-20 21-22 23-24 25-26 27-28 29-30 31-32 Function Write Protect Delayed Spindle Start SCAM2 Reserved Reserved Reserved Reserved Option Jumper Connector C4 Pin No 1-2 3-4 Function Termination Power (Drive) Termination Power (SCSI bus) Green jumper sockets are used for the customer's selection.(They are shown with thick lines) SPECIFICATIONS DK319H-18(WS) DK329H-91(WS) Formatted Capacity * (Gbytes) 18.4 9.2 Bytes per Sector * 512 #Cylinders * /#Heads/#Disks 7812/20/10 7812/10/5 Maximum LBA * (Hex) 224DF2B 1126F95 Seek Time:Average(Read/Write)(ms) 7.5/8.5 Spindle Speed(rpm) 7198 SCSI Interface Type fast/fast20(Ultra) Transfer Rates:Async/Sync/Fast/Ultra(Mbyte/s) 5.0/10.0/20.0/40.0 Operating Temperature(Celsius/Fahrenheit) 5-50 °C / 41-122 °F Power: 12V peak(Typ.) / 5V peak(Typ.)(A) 2.7/1.35 1.9/1.35 Start Time(s) 15 14 * : Indicates Specifcation for Default Setting of 512 Bytes/Sector. Installation Tips: Installation horizontal or vertical.(6 direction) Provide adequate air flow to cool drive Use 4 mounting screws[6X32 UNC]. Maxinum screw penetration:3.8mm(0.15in)into drive.

Contact Support   Downloads   Hitachi Design Studios   Technical Library   Warranty/RMA

Terms of Use | Privacy Policy | Contact Us  © 2008 Hitachi Global Storage Technologies