In order "Start/Stop Spindle Motor" command to be effective,
release the jumper as "Supported" before DC power-on.
Application : PCB Rev. 1,2 Jumper Location
JP164
(pin 11-12) |
 |
 |
| Function |
Not Supported |
Supported |
Application : PCB Rev. 3 or more Jumper
Location
JP162
(pin 11-12) |
 |
 |
| Function |
Not Supported |
Supported |
* A drive as shipped is set as "Not Supprted".
Fig. 2-10 Jumper Setting for Motor Start/Stop Command Support
(SZ905)
