DK515 Jumper Plug Installation
Drive Address Jumper (JP213, Pin 1-6)
Drive address can be selected by using the jumper switch (JP213)
the jumper setting and the selected Drive address is shown in table
2-3. Drive No. 0 is not used.
Table 2-3 Jumper Setting for Drive Address
| Drive No. |
None |
#1 |
#2 |
#3 |
JP213
(pin 1-6) |
 |
 |
 |
 |
| Drive No. |
#4 |
#5 |
#6 |
#7 |
JP213
(pin 1-6) |
 |
 |
 |
 |
* At the time of shipment, Drive #1 is selected.
|
