DK515 Jumper Plug Installation
Synchronized Spindle Mode Select Jumper (JP282, Pin 3-6)
Synchronized spindle mode can be selected by using the jumper switch
(JP282, pin 3-6). This Jumper Setting will be aborted by the following
Set Configuration command. Set the jumpers, before turning on the
DC power.
Table 2-7 Jumper Setting for Synchronized Spindle Mode
JP282
(pin 3-6) |
 |
 |
 |
 |
| Function |
Off Line |
Slave |
Master |
Remote |
* At the time of shipment, "Off Line" mode is selected.
|
