DK516 Jumper Plug Installation
Sector Length Jumper (JP2, Pin 9-14)
This Jumper Setting function is effective with Hard Sector mode.
This Jumper Setting will be aborted by the only "SET BYTES
PER SECTOR" command. All the applicable configurations of Bytes/Sector
or Sector/Track are listed in Table 2-8. Set the jumper(s) before
on the DC power.
Table 2-8 Jumper Setting for Sector Length
JP2
(pin 9-14) |
 |
 |
 |
 |
Bytes Per
Sector |
339 |
342 |
595 |
603 |
Sectors
Per Track |
135 |
134 |
77 |
76 |
Data
Length |
256 |
256 |
512
(Factory Default) |
512 |
JP2
(pin 9-14) |
 |
 |
 |
 |
Bytes Per
Sector |
1119 |
2184 |
Not Used |
Sectors
Per Track |
41 |
21 |
Data
Length |
1024 |
2048 |
Jumper Location
|
