DK516 Jumper Plug Installation
Sector Mode Select Jumper (JP2, Pin 7-8)
Hard Sector mode issues SECTOR clock on J1-pin16 and J2-pin2.
In Soft Sector mode ADDRESS MARK FOUND-N is found on J1-pin16 and
J2-pin2. "Set Configuration" command takes precedence
over this Jumper Setting function.
Table 2-7 Jumper Setting for Sector Mode Select
JP2
(pin 7-8) |
 |
 |
| Function |
Off Line
(Factory Default) |
Soft Sector |
* In case of PCB revision is 0, "Soft Sector" mode
is Selected.
Jumper Location
|
