DK516 Jumper Plug Installation
Synchronized Spindle Mode Select Jumper (JP2, Pin 1-4)
Synchronized spindle mode can be selected by using the jumper switch.
This Jumper Setting will be aborted by the following Set Configuration
command. Set the jumpers, before turning on the DC power.
Table 2-5 Jumper Setting for Synchronized Spindle Mode Select
JP2
(pin 1-4) |
 |
 |
 |
 |
| Function |
Off Line
(Factory Default) |
Slave |
Master |
Remote |
Jumper Location
|
