Before this Jumper Plug Installation/setting, please use ESD protected cushioning material for safer operation.
The following jumpers are accessible to the user (use green jumper plugs, as for J2 use blue jumper plugs) :

Note 1)

The DK517C jumpers other than listed above are installed by the manufacturer (black jumper plugs) and must not be modified or replaced by the user. These setting are unique to each PCB.

Fig. 2.7 Jumper Location (at the shipment).

Note:

*1) The terminator of the controller other than the last drive of SCSI Daisy Chain must be removed.

*2) The terminator for Synchronized Spindle option.

*3) : Jumper at the shipment : User changeable (Green Jumper)

*4) Connector for J2