Fig. 2-7 Jumper Location

Drive Selection Numbers
* #1	#2	#3	#4

Fig. 2-8 Jumper Setting

After cleaning the drive, pack it in the following manner to prevent moisture.

1. Put the drive in a ESD protective vinyl bag with a desiccant.
2. Protect the drive against shocks with the corrugated board and cushioning material provided by the manufacturer, or with equivalents.
3. Clearly mark "UP" and "DOWN" on the outside of the packing case and write such cautions as "Do not turn this case upside down" and "Take care of handling".
4. When packing, unpacking or transporting the drive, do not apply any excessive force to parts on the PC board.

1. Pack the drive so that it will be protected against shocks of 20G or more during transportation.
2. When you take the drive out of the packing case and carry it on a hand truck, lay on it cushioning material (for example, unethane foam cushioning 20mm or more thick).

Take every possible care in handling the drive. It is sensitive to vibrations shocks and dust.