Travelstar XP SCSI
Jumper settings
Model: DPRS-20810 and DPRS-21215
The drive recognizes its device address, namely
SCSI ID, with the condition of -ID1, ID-2, and ID-4. The signal condition and
the device address are shown below.
40-pin SCSI connector
SCSI address settings (J2 pins)
| 5 (-ID1) |
6 (-ID2) |
7 (-ID4) |
Address |
| open |
open |
open |
0 |
| GND |
open |
open |
1 |
| open |
GND |
open |
2 |
| GND |
GND |
open |
3 |
| open |
open |
GND |
4 |
| GND |
open |
GND |
5 |
| open |
GND |
GND |
6 |
| GND |
GND |
GND |
7 |
Note: The drive does not have termination or pull up resistors for the SCSI interface.
|
