Hitachi.comHitachi.us 
Hard disk drives
 
   

  Overview     General specifications 

Endurastar J4K20 and N4K20 hard disk drives specifications

Endurastar J4K20 and N4K20 models Capacity (GB) RPM Interface
 HTA422020F9ATJ0
20 4172 ATA-5
 HTA422020F9ATN0
20 4172 ATA-5
     
Configuration  HTA422020F9ATJ0  HTA422020F9ATN0
Interface ATA-5 ATA-5
Capacity (GB)1 20 20
Sector size (bytes) 512 512
Data heads 2 2
Disks 1 1
Max. areal density (Gbits/sq.inch) 37.7 37.7
     
Performance  HTA422020F9ATJ0  HTA422020F9ATN0
Data buffer (MB)2 8 8
Rotational speed (rpm) 4172 4172
Latency (average ms) 7.2 7.2
Max.media transfer rate (MB/sec) 31.4
Max. interface transfer rate (MB/sec) 100MB/sec Ultra DMA mode-5
Seek time (ms)    
Average (typical) 13 13
Maximum (typical) 24 24
Minimum (typical) 3 3
     
Reliability    
Error rate (non-recoverable) < 1 per 1013 bits transferred < 1 per 1013 bits transferred
Load/unload cycle 300,000 300,000
     
Power    
Requirement +5VDC(±5%) +5VDC(±5%)
Startup (max. peak) 6.5 W 6.5 W
Seek (average) 2.4 W 2.4 W
Read (average) 2.15 W 2.15 W
Write (average) 2.15 W 2.15 W
Performance idle (average) 1.8 W 1.8 W
Active idle (average) 0.80 W 0.80 W
Low power idle (average) 0.60 W 0.60 W
Standby (average) 0.15 W 0.15 W
Standby (average) 0.1 W 0.1 W
     
Physical size    
Height (mm) 9.5
Width (mm) 70  
Depth (mm) 100  
Weight (g) 107  
     
Environmental characteristics    
Operating    
Ambient temperature -20° to 85° C 0° to 60° C
Relative humidity (non-condensing) 5% - 90% 5% - 90%
Maximum wet bulb (non-condensing) 40° C 40° C
Shock (half sine wave) 100G/11ms 100G/11ms
Vibration (sine wave) 1.0 G (22 - 500Hz) 1.0 G (22 - 500Hz)
     
Non-operating    
     
Ambient temp -40° to 85° C
Relative humidity (non-condensing) 5% - 95% 5% - 95%
Maximum wet bulb (non-condensing) 40° C (104° F) 40° C (104° F)
Shock (half sine wave) 800G/1ms 800G/1ms
  1,200G/1ms (1 disk)  
Vibration (sine wave) 5.0G (22 - 500Hz) 5.0G (22 - 500Hz)
     
Acoustics (A-Weighted Sound Power (Bels)  
Idle (typical) 2.4 2.4
Seek (typical) 3.0 3.0

1 GB equals one billion bytes when referring to hard drive capacity; accessible capacity may be less.
2 Space reserved for firmware





   Terms of Use | Privacy Policy | Contact Us