Install your Deskstar hard disk drive using the step-by-step guide.

Important Notes

Before starting your installation, follow all of these guidelines.

• Turn off your computer.
• Unplug your system.
• Discharge any static electricity from yourself and your clothing:
  - With one hand, touch an unpainted, metal surface on your computer chassis, then touch the ESD bag with the other hand.
  - Remain in contact with the chassis and the bag for a minimum of two seconds.
• Back-up all data before beginning installation.

Handling Precautions

Adhere to all handling precautions. Poor handling, physical impact or electrical shock cause most premature hard disk drive failures.

• Set the drive down gently to prevent damage from impact or vibration.
• Do not open the ESD bag containing the drive until needed.
• Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic components.
• Do not press on the top or bottom of the drive.
• Do not cover the drive's breather hole.